So I was running around YouTube today and randomly got recommended a video where this guy, JerryRigEverything, put the handheld console through it's paces with a durability test:
I got to say, with the internet exploding the way it always does about hardware failures, I figured this little guy would be much more fragile than's actually shown. Overall, I'm pretty impressed with the build quality. Not gonna put it in my pocket with my keys, but that's true about every other piece of electronics I've ever owned.
He's also got a tear-down/rebuild video that I've got liked in case I ever need to do some DIY repairs like I had to do on my PS4.
TLDR: It's a robust little machine, and repairs should be relatively easy depending on the availability of replacement parts. Get a screen protector.
Can't wait to see when he'll get around to opening up those JoyCons.
I got to say, with the internet exploding the way it always does about hardware failures, I figured this little guy would be much more fragile than's actually shown. Overall, I'm pretty impressed with the build quality. Not gonna put it in my pocket with my keys, but that's true about every other piece of electronics I've ever owned.
He's also got a tear-down/rebuild video that I've got liked in case I ever need to do some DIY repairs like I had to do on my PS4.
The display screen in made out of plastic, so things like keys can scratch it, trade off being that it won't crack as easily as a phone screen. Getting a screen protector will fix 99% of the problems you could run into. Dunno what kind of display it actually has: Jerry usually holds a lighter to the screen to see how the display reacts, but the plastic is so thick it reached it's melting point before the flame could actually affect the display.
The rubber on the sticks and buttons is plenty thick and hard to remove, so those will last a good long time. Meanwhile, the labels(?) on the buttons are injected plastic, which he cut down quite a bit, so even if you wear down the buttons to nubs, it'll still have that X or A or whatever, they won't rub off.
The kickstand is flimsy and designed to come off easily. It is also designed to pop back on easily, which he did repeatedly.
He put a fair bit of effort into trying to snap the console in half and couldn't do it, at least without leveraging tools or such. Basically, it should be fine unless a heavy person sits on it at an angle or someone is deliberately and aggressively trying to break it. JoyCon rail system is similar. Had to put in quite a bit of effort to snap one off the console, and it wasn't the plastic bit on the Con or the metal rail on the console that broke, it was the places where the screws were. Aka, the screws stripped out or the holes where the screws were put popped out. Crucially, unless the ribbon strip at the bottom gets cut, the rail breaking off won't stop the JoyCons from charging.
The dock can scratch the screen of the console, but it shouldn't be a part where the display is showing if the console is being put in straight. And again, screen protector solves this problem.
If you're having heating issues, it might be worth if to open up the console and check the thermal paste. Easy fix if the paste is bad. At some point the console is hand assembled, as his had fingerprints on the inside when he opened it up.
The battery is actually a bit of a ***** to replace. It's glued into place, and because it's lithium-ion, you really don't want to use metal tools. A heat gun and some careful prodding is required to get it out of place.
The rubber on the sticks and buttons is plenty thick and hard to remove, so those will last a good long time. Meanwhile, the labels(?) on the buttons are injected plastic, which he cut down quite a bit, so even if you wear down the buttons to nubs, it'll still have that X or A or whatever, they won't rub off.
The kickstand is flimsy and designed to come off easily. It is also designed to pop back on easily, which he did repeatedly.
He put a fair bit of effort into trying to snap the console in half and couldn't do it, at least without leveraging tools or such. Basically, it should be fine unless a heavy person sits on it at an angle or someone is deliberately and aggressively trying to break it. JoyCon rail system is similar. Had to put in quite a bit of effort to snap one off the console, and it wasn't the plastic bit on the Con or the metal rail on the console that broke, it was the places where the screws were. Aka, the screws stripped out or the holes where the screws were put popped out. Crucially, unless the ribbon strip at the bottom gets cut, the rail breaking off won't stop the JoyCons from charging.
The dock can scratch the screen of the console, but it shouldn't be a part where the display is showing if the console is being put in straight. And again, screen protector solves this problem.
If you're having heating issues, it might be worth if to open up the console and check the thermal paste. Easy fix if the paste is bad. At some point the console is hand assembled, as his had fingerprints on the inside when he opened it up.
The battery is actually a bit of a ***** to replace. It's glued into place, and because it's lithium-ion, you really don't want to use metal tools. A heat gun and some careful prodding is required to get it out of place.
TLDR: It's a robust little machine, and repairs should be relatively easy depending on the availability of replacement parts. Get a screen protector.
Can't wait to see when he'll get around to opening up those JoyCons.